>> 联系我们

广州粤欣高空设备租赁有限公司
联系人:李工
手 机:135 3370 3370
微 信:gz820217302
邮 箱:26167732@qq.com

联系人:谢工
手 机:139 2605 8596
Q Q: 820217302
网 址:www.020gzbjgs.cn
地 址:广州市天河区棠德南路28号盈信大厦F30

  >> 服务项目

广州高空车出租 佛山升降车出租
中山高空车出租 珠海高空车租赁
江门升降机出租 阳江高空车租赁
肇庆高空车出租 湛江高空车租赁
汕头高空车出租 河源高空车出租
潮州高空车出租 云浮高空车出租
汕尾高空车出租 茂名高空车出租
清远高空车出租 增城高空车出租



诠释吊车垂直油缸漏油怎么维修    
 
吊车垂直油缸漏油怎么维修,广州吊车出租小编在此分享:
How to repair the oil leakage of the crane vertical cylinder, Guangzhou crane rental small series to share:
1、把吊车油缸下部支脚拆下,把油缸上双向液压锁的油管拆下【拆时注意要用棉纱挡在吊车配件油管接头上,防止压力油出溅到身上】
1, the lower part of the crane cylinder foot removed, the oil cylinder two-way hydraulic lock on the oil pipe removed [demolition note to use cotton yarn in the crane fittings oil pipe joints, to prevent the pressure oil splashed on the body
2、把吊车油缸下部2个大圆螺母拆下,把油缸从水平箱内向上提出来。
2, the lower part of the crane cylinder 2 big round nut removed, the cylinder from the inside of the horizontal box.
3、把导向套上卡簧取下,用合适的圆筒把导向套投进油缸内露出卡键下端把3瓣卡键取出后,把带着导向套活塞的活塞杆拽出。
3, the guide sleeve on the spring, take the appropriate cylinder into the guide sleeve into the oil cylinder to expose the lower end of the card key to take out the 3 pin key, with the guide sleeve piston rod.
4、按照顺序依次将活塞,导向套取下用煤油清洗擦干后换上新密封件再装好,用胶皮把缸筒内卡键槽垫平并黄油或液压油后将活塞 装进缸筒用平头螺丝刀将密封件唇边塞进缸筒内投进即可。
4, in accordance with the order of the piston, taking kerosene dry cleaning under the guidance after the new seal re installed, with rubber cylinder pad and the internal keyway butter or the hydraulic oil cylinder piston will be put into use screwdriver seal lips into the cylinder can be put into.
以上就是广州吊车出租小编分享吊车垂直油缸漏油维修方法。
The above is the Guangzhou crane rental small sharing crane vertical cylinder oil leakage repair method.
返回
上一篇:防止吊车因为偏沉失重导致翻车
下一篇:冬季应该怎样保养吊车?

Copyright 2006-2018 广州粤欣机械设备租赁有限公司(www.020gzbjgs.cn) All Right Reserved

广州粤欣高空设备租赁有限公司地址:广州市天河区棠德南路28号盈信大厦2楼(欢迎来公司面谈业务)

服务地区: 珠海高空车出租|福州高空车出租|海南高空车出租|湛江高空车出租|路灯维修车出租|升降车出租|高空车作业车出租